Home > NEWS

FILTER


PRODUCT


Contact US

  • MSN : huax-printing@hotmail.com
  • TEL : 0086-13416319169
  • FAX : 020-82695386
  • EMAIL:sales@huax-printing.com
  • ADD:No.28,Guangyuan,Guangzhou

Online Service

  • SALES
  • SERVICE
  • Inkjet printer conveyor malfunction analysis and solutions

    Solutions for industrial inkjet printer conveyor's belt off tracking:

    1. Keep the conveyor and machine body in a horizontal way, if the ground is uneven, please adjust the base of the machine.
    2. If the machine body is in a horizontal level, check the elasticity of the belt to  guarantee it is not too tight nor too loose. On the condition of too tight to the belt:
    (1) If the belt is off tracking to the left (opposite to the motor), please loosen the adjustment screw in the aluminium block which is in the right side of the tail of the conveyor;
    (2) If the belt is off tracking to the right (at the same side of the motor), please loosen the adjustment screw in the aluminium block which is in the left side of the tail of the conveyor.
    3. On the condition of too loose to the belt:
    (1) If the belt off tracking to the left (opposite to the motor), please screw up the adjustment screw in the aluminium block which is in the left side of the tail of the conveyor;
    (2) If the belt off tracking to the right (opposite to the motor), please screw up the adjustment screw in the aluminium block which is in the right side of the tail of the conveyor;

     

    Solutions for industrial inkjet printer conveyor's belt shaking or motor shaking:

    Open the speed controller panel to see whether the two chain wheel are in the same level. If  they are not in the horizonal level, please firstly loose the screw of the fixed chain wheel and adjust the two chain wheel to the same level and then screw up; then check the chain wheel or the synchronous belt whether is too loose or too tight. Normally, too loose or too tight is not suitable, because both of these conditions could bring in chain wheel or synchronous belt shaking. If there comes the shaking, please suitably adjust the installation site for the motor to solve this problem. The adjustment way is to loose the screws for the motor, and move the motor up and down slightly to get suitable elasticity site, then screw up.

     

    Notes: The copyrights are owned by Huax Technology Co.,Ltd.Please quote it as reference upon reproduction.


    Source : | Posted Date : 12-09-06 0:29:59 | Visited :
    TAG :


    Prev. : Environment Requirements by Industrial Inkjet Printers
    Next. : Notes and solutions for CIJ printers installation